Για μεγάλες βόλτες και πολλά χιλιόμετρα το EnergyPak Plus E-bike Range Extender είναι μία ελαφριά και μικρή μπαταρία που δεν θα σας εγκαταλείψει ποτέ. Επιπλέον χωρητικότητα 250Whr και αύξηση κατά 40% της αυτονομίας σε σχέση με την στάνταρτ μπαταρία EngergyPak Smart 625Whr .

1. Remove your existing E-bike battery. Using your E-bike battery key or T25 torx wrench, loosen and remove your battery.
2. Remove the rubber plugs from the EnergyPak Plus mounting holes. Located on the downtube, simply pop the rubber plugs out and save them for later!
3. Install the mounting plate for the EnergyPak Plus. Place the bracket on the downtube, lining up the bolt holes with the holes in the frame. Secure using a 10mm box wrench and 5mm allen wrench.
4. Slide the EnergyPak Plus in place. Check connection to make sure the EnergyPak is secure.
5. Secure the retaining lever. Locate the retaining lever on the EnergyPak and tighten with a T25 torx wrench.
6. Re-attach your existing battery.
7. Attach the cable from the EnergyPak Plus to the charge port. The cord from the EnergyPak Plus plugs right into the location where you usually charge your E-bike.
8. Secure the cable with the provided strap. To reduce noise and risk of the EnergyPak Plus cord snagging anything during your ride, wrap the strap around the cord and the downtube to secure.
9. Go Ride!