High-performance grade raw carbon fiber and custom resin is used to produce this high-quality frame in Liv’s own composite factory. Handcrafted monocoque construction makes both the mainframe and rear swingarm extremely lightweight, stiff and compliant.
Pique Advanced Pro 29 1
Attack the course with speed and efficiency on the Pique Advanced Pro 29. The stiff, light, full-suspension XC bike is ready to set PRs and snag podium steps.
Key Performance Factors
Fast
A light and stiff Advanced-Grade Composite frame and wheelset maximizes your power and efficiency, especially noticeable on climbs.
Capable
29-inch wheels easily roll over small obstacles, while 100mm of Maestro suspension – tuned for women, by women – help absorb rougher trails.
Stable
An integrated dropper seatpost and clearance for up to 2.4-inch tires means you can confidently ride moderately technical terrain.
Акценти
1
Advanced-Grade Composite Mainframe and Swingarm
2
Maestro Suspension Technology
High-performance grade raw carbon fiber and custom resin is used to produce this high-quality frame in Liv’s own composite factory. Handcrafted monocoque construction makes both the mainframe and rear swingarm extremely lightweight, stiff and compliant.
3
100 mm Fork
100mm of travel up front
4
29-Inch Wheels
Featuring 29-inch wheels with 2.4-inch tire clearance for maximizing speed, acceleration and maneuverability
5
Boost Hub Spacing
Boost 15x110 [F], 12X148 [R] hub spacing improves stiffness, trail handling and tire clearance
6
Advanced Forged Composite Technology
An upper rocker arm created with Advanced Forged Composite Technology for increased stiffness, durability, and lighter weight
7
XC-Specific Dropper Seatpost
30.9mm diameter cross-country specific dropper seatpost enables the rider to lower her center of gravity on steep descents
8
Tubeless
Tubeless ready, so you can run lower tire pressure for added traction and control
Технологии и Функции
Advanced Composite Technology
Liv’s High-Performance Grade raw carbon material is used to produce this frameset in our own composite factory. Using state-of-the-art materials and manufacturing techniques, Liv’s Advanced-Grade Composite frames are designed to offer light weight and stiffness with optimal compliance.
Advanced Forged Composite Technology
A state-of-the-art, high-pressure molding process used to produce complex-shaped carbon fiber components that are lighter, stiffer and stronger than similar aluminum components.
Maestro Suspension Technology
Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient and independent suspension system on the trail.
OverDrive
Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4” lower and 1 1/8” upper for road, 1 1/2” lower and 1 1/8” upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness.
PowerCore
A massively oversized bottom-bracket/chainstay area features a fully integrated, 86-millimeter wide bottom-bracket design (92-millimeterwide for off-road bikes). Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside.
Tubeless System
Engineered with proprietary Dynamic Balanced Lacing technology, this tubeless ready composite WheelSystem delivers superior efficiency, pinpoint control and comfort.
Наръчник за Размери и Геометрия
Sizing to be used as a reference only. Please check with a local authorized dealer to determine the correct size.
Available sizes may vary from country to country.
- XS
- 148 cm4’10”
163 cm5’4”
- S
- 158 cm5’2” 169 cm5’7”
- M
- 164 cm5’5” 175 cm5’9”
- L
- 170 cm5’7” 183 cm6’0”
| XS | S | M | L | ||
|---|---|---|---|---|---|
| A | Seat Tube Length (mm) (inch) | 39015,4 | 40616 | 44517,5 | 48219 |
| B | Seat Tube Angle (degrees) | 74,0° | 74,0° | 74,0° | 74,0° |
| C | Top Tube Length (mm) (inch) | 56522,2 | 58022,8 | 59523,4 | 61024 |
| D | Head Tube Length (mm) (inch) | 903,5 | 953,7 | 1003,9 | 1104,3 |
| E | Head Tube Angle (degrees) | 68,5° | 68,5° | 68,5° | 68,5° |
| F | Fork Rake (mm) (inch) | 512 | 512 | 512 | 512 |
| G | Trail (mm) (inch) | 92,93,6 | 92,93,6 | 92,93,6 | 92,93,6 |
| H | Wheelbase (mm) (inch) | 110043,3 | 111543,9 | 113144,5 | 114745,2 |
| I | Chain Stay Length (mm) (inch) | 43817,2 | 43817,2 | 43817,2 | 43817,2 |
| J | Bottom Bracket Drop (mm) (inch) | 451,8 | 451,8 | 451,8 | 451,8 |
| K | Stack (mm) (inch) | 57822,8 | 58323 | 58723,1 | 59723,5 |
| L | Обсег (mm) (inch) | 39915,7 | 41316,3 | 42716,8 | 43917,3 |
| M | Stand Over Height (mm) (inch) | 69327,3 | 70327,7 | 72628,6 | 75329,6 |
| N | Ширина на Кормило (mm) (inch) | 72028,3 | 72028,3 | 74029,1 | 74029,1 |
| O | Дължина на Лапа (mm) (inch) | 502 | 502 | 602,4 | 702,8 |
| P | Дължина на Курбел (mm) (inch) | 1656,5 | 1706,7 | 1706,7 | 1756,9 |
| Q | Размер на Каплите | 29" | 29" | 29" | 29" |
All specifications listed are subject to change without notice.